Camera settings
How to set up a GoPro for a headcam video that goes beside the oSplit map: 4K 8:7 at 60 fps, GPS, stabilisation and battery.
The aim is the best picture the whole path (camera, computer, YouTube) can use, and a recording that lines up with your watch without any work from you. These are for a GoPro HERO11 Black; other models are below.
#The short version
| Setting | Value |
|---|---|
| Controls | Pro (Dashboard → swipe left → Interface) |
| Resolution | 4K 8:7 |
| Frame rate | 60 fps (50 with Anti-flicker at 50 Hz also works) |
| Lens | Wide (the only one 8:7 has) |
| GPS | On; off is fine to save battery (without GPS) |
| HyperSmooth | AutoBoost |
| Bit rate (Protune) | High |
| 10-bit (Protune) | Off |
| Color / Sharpness (Protune) | Natural / Low |
| Shutter, EV, white balance, ISO | Auto, 0, Auto, 100–1600 |
| Auto power off | Never |
| Beeps, LEDs, wireless | Off |
| Card | 256 GB, V30 or faster, formatted in the camera |
Menu names move a little between firmware versions; if one is not where this says, look through Preferences and Protune for the name.
#Why these
4K 8:7, not 16:9. 8:7 is the whole sensor: a tall picture, so the map in your hand is in the frame. The finished video places it uncropped, 2468 × 2160 pixels, beside a 1372 × 2160 panel: together exactly 3840 × 2160, a 4K YouTube video. A short can be cut from the same picture at full quality. A 16:9 or 4:3 recording still works, with its sides cut off.
60 fps. Running with a camera on your head is fast, shaky movement; 60 fps looks much smoother. 30 fps is fine for a long race (see battery below).
GPS on. The camera writes your position and the exact time into the video file. oSplit uses it to line the video up with your watch to a fraction of a second, without clapping, buttons or typing. Wait for the GPS icon to settle before you start recording.
HyperSmooth AutoBoost. Head-mounted footage needs strong stabilisation; AutoBoost gives the most while keeping the widest picture.
High bit rate, 10-bit off. High bit rate keeps leaves and ground from turning to mush. 10-bit is harder to read on many computers and YouTube's normal video is 8-bit anyway.
Sharpness Low, everything else automatic. The picture is scaled down, which sharpens it; forest light changes all the time, so let the camera follow it.
Auto power off: never. The camera must not switch itself off while you wait to start.
#Recording without GPS
Switch GPS off to save battery, or use a camera that has none (HERO12). oSplit then lines the video up from the camera's movement sensor, which every HERO11 and HERO12 file has: running shakes your head far more than standing or reading the map, and your watch knows how fast you ran.
- Stand still for about five seconds before you set off, with the camera already recording.
- Wear your watch and punch the start and finish as usual.
- If oSplit is not sure, it asks you to show it your start punch in the preview: see Headcam video.
The movement match has been tested on simulated data only, not yet on a real race. The preview shows at once if it is wrong: the map does not turn when you do.
#Space and battery
- 4K 8:7 at 60 fps is roughly 50 GB an hour. A 256 GB card holds about four hours. The camera cuts a long recording into files of about 4 GB (
GX010123.MP4,GX020123.MP4: the same number0123is the same recording). Copy them all into one folder. - A battery lasts roughly an hour at 4K 60 fps in mild weather; less in the cold. For a longer race take a spare, or record at 30 fps, which uses noticeably less power and space.
- In sun and warm weather the camera can stop to cool down. Do not leave it running in the sun before the start.
#Mounting and before the start
- A head strap with the camera tilted down, so the horizon is in the top third of the picture and your map hand is at the bottom.
- The map in the panel turns with the direction you are running; the picture shows where your head points. They will not match when you look sideways, which is normal (and shows where you looked).
- Before the race: GPS on and settled, a charged battery, a card with space, a clean lens (it matters more than any setting). Start recording before your start; oSplit trims the video to 15 seconds before your start punch and 10 after your finish.
#Other cameras
- HERO5 to HERO10, HERO13: GPS works the same way. HERO9 and HERO10 have no 8:7: record 4K 4:3; the middle 8:7 is used.
- HERO12: no GPS: see Recording without GPS.
- Other makes: any MP4 works, but oSplit finds no GPS or movement in it: show it your start punch in the preview with Start punch is here.